Streetbike Rider Picture Website
|More Information on the Harley-Davidson VRSC|
The Harley-Davidson VRSC (V-Twin Racing Street Custom) is a model of cruiser motorcycles, produced by Harley-Davidson.
The VRSC was introduced in 2001 in a single model called the V-Rod. The V-Rod was developed to compete against Japanese and American muscle bikes. The "V-Rod" made use of the Revolution engine, developed jointly with Porsche that, for the first time used overhead cams and liquid cooling. Unlike other Harley production motorcycles, a 60-degree V-twin engine, the radiator and the hydroformed frame members support the round-topped air cleaner cover. The fuel tank on the V-Rod is located underneath the seat, placing the rider on top of it, rather than the usual frontal placement. The "tank" in this case is dressing, hiding the frame. Loosely based on the VR-1000 Superbike, Harley-Davidson builds it as a platform for drag-racing competition machines. All VRSC models are produced at Harley-Davidson's Vehicle and Powertrain Operations facility in Kansas City, Missouri.
Model years: 2002–2006. The original V-Rod had a 1,130 cubic centimetres (69 cu in) Revolution Engine, producing a claimed 115 horsepower (86 kW) at the crank. The V-Rod had 49 mm forks and a 180 mm rear tire, with solid disc wheels. The VRSCAs were all factory equipped with 3.7 US gallons (14 l; 3.1 imp gal) fuel tanks. In 2006 the VRSCA was equipped with Brembo Brakes. The VRSCA was only offered with forward controls. 2003 models were included in the 100th anniversary edition.
Model years: 2007–2010. The VRSCAW V-Rod is the successor to the VRSCA. First Produced in 2007, it is essentially a VRSCA with a new frame to accommodate the 240 mm rear tire and five gallon gas tank that came standard. The aluminum bodywork of the VRSCA was used in a few early-production VRSCAW models, but was later dropped. With these changes the VRSCAW is a claimed 37 pounds (17 kg) heavier than its predecessor. For the first production year the power-plant remained an unchanged 1,130 cubic centimetres (69 cu in) Revolution engine. The VRSCAW is only offered with forward controls. The combination of increased weight, and a 240 mm rear tire with no power increase made the 2007 VRSCAW the slowest production VRSC produced
In 2008 the VRSCAW V-Rod's Revolution was increased from 1,130 cc to 1,250 cubic centimetres (76 cu in), producing a claimed 84 pound force-feet (114 N·m) @ 7,000 rpm, and peak power of 123 horsepower (92 kW) at the crankshaft, a slipper clutch was also added, as was an anti-lock braking system option. For the 2009 model year the VRSCAW replaced the VRSCD, which was dropped from the line, as the "base model" for the VRSC family, and the suggested retail price was reduced.
Model years: 2004–2005. The VRSCB V-Rod had a two-year run. It was mechanically identical to the VRSCA, with cosmetic differences included a black frame, polished aluminum and black powder-coated engine, and a slightly different clamhell, instrument housing and handlebars. The VRSCB was only offered with forward controls.
VRSCD Night Rod
Model years: 2006–2008. The Night Rod was introduced in 2006 as the “new hot rod-inspired motorcycle” built around the Revolution engine. The Night Rod has mid controls similar to the 2006 Street Rod. These are the only two V-Rod models with mid controls (Rear sets). Straight-shot mufflers helped the Revolution Engine to produce a claimed 120 horsepower (89 kW) at the crank. The Night Rod had a black frame, black and chrome engine, Brembo Brakes, slotted aluminum disk wheels, and a color-matched fairing.
In 2008 the VRSCD Night Rod's Revolution was increased from 1,130 to 1,250 cubic centimetres (69 to 76 cu in), producing a claimed 85 pound force-feet (115 N·m) @ 7,000 rpm, and peak power of 125 horsepower (93 kW) at the crank, a slipper clutch was also added, as was an ABS option. For the 2008 model year, the VRSCD was the only remaining VRSC model to still have a 180 mm rear tire or mid-pegs. 2008 was also the final year of production for the VRSCD Night Rod.
VRSCDX Night Rod Special
Model years: 2007–Present. The VRSCDX is marketed as the factory made custom version of the standard Night Rod and is also part of Harley-Davidson's "Dark Custom" series. In addition to a 240 mm wide rear tire, most of the chrome components of the VRSCD were replaced with black. The wheels were replaced by black slotted disk wheels, with dark orange pin striping. The Straight shot dual exhaust produced a claimed 120 horsepower (89 kW) at the crank. A 5 gallon tank was standard. The DX also include racing stripes. In 2008 the VRSCDX Night Rod Special's Revolution was increased from 1,130 to 1,250 cubic centimetres (69 to 76 cu in), producing claimed torque of 85 pound force-feet (115 N·m) @ 7,000 rpm, and peak power of 125 horsepower (93 kW) at the crank, a slipper-clutch was also added, as was an ABS option.
For the 2012 model year, Harley-Davidson launched a tenth anniversary version of the Night Rod Special. This model had a straight-shot exhaust with dual, chrome slash-cut mufflers and chrome exhaust shield; split five-spoke cast aluminum wheels with diamond cut highlights; pullback handlebar with polished finish; inverted front forks in silver and polished finishes; stylized, chrome speed screen visor; graphics, including V-Rod 10th anniversary emblem; and chrome powertrain with platinum crankcase and heads.
VRSCF V-Rod Muscle
Model years: 2009–Present. The V-Rod Muscle was introduced in the summer of 2008 at the Harley-Davidson dealer show in Las Vegas for the 2009 production model year. In promoting the Muscle, American fashion model Marisa Miller was hired for an advertising campaign aimed at younger, urban riders. It would be one of only three VRSC models for 2009. Like the other two models, the Muscle used the 1,250 cubic centimetres (76 cu in) Revolution Engine, a 240 mm wide rear tire, 5 US gallons (19 l; 4.2 imp gal) fuel tank, slipper clutch and forward controls. Unlike the other models in the VRSC lineup, the Muscle had straight shot dual exhausts, with a crossover, one on each side of the bike, unlike the 2>1>2 exhaust found on all other VRSC models. Additionally, the Muscle used an air-box with mock-up air-rams like those found on many American pony and muscle cars. In the production version of the bike the air-rams are cosmetic. The VRSCF also had a chopped rear fender with integrated turn signals, and a side-mounted license plate. Turn signals were integrated into the rear view mirrors for the first time as a stock feature on a Harley-Davidson motorcycle. The VRSCF provided at the crank a claimed 86 pound force-feet (117 N·m) of torque at 6,500 rpm, which was slightly more torque than the other VRSC models, at a slightly lower engine speeds. Claimed peak crank horsepower was slightly lower than the Night Rod Special, at 122 horsepower (91 kW) at 500 rpm lower engine speed.
VRSCSE: Screamin' Eagle CVO V-Rod
Model years: 2005. In 2005 Harley-Davidson's Custom Vehicle Operations produced their first V-Rod. The dimensions were identical to the VRSCA at the time, but the VRSCSE had extra chrome, custom paint, and not the typical "clamshell" found on other VRSC models. The VRSCSE had a 1,250 cc Revolution Engine, with CNC ported heads.
VRSCSE2: Screamin' Eagle CVO V-Rod
Model years: 2006. The VRSCSE2 was the first V-Rod or VRSC model with a 240 mm rear tire. It also used the Screamin' Eagle 1,250 cc Revolution Engine.
VRSCR: Street Rod
Model years: 2006–2007. The Street Rod was marketed as the “roadster-inspired” member of the VRSC line. The Street Rod was the first VRSC to use inverted forks made by Showa Corporation, with a steep rake and Brembo supplied brakes. It had the highest seat height at 30 inches (76 cm) of any VRSC model, and claimed the greatest lean angle at 40°, over the 32° lean of the other VRSC models. The Street Rod came equipped solely with mid-mounted controls. The Street Rod was the first with a 5-gallon tank in the 2006 year model, that would become standard for the line in 2007.
Model years: 2007. Harley-Davidson put out the VRSCX as a Screamin' Eagle Tribute bike during the Harley V-Rod's second consecutive NHRA Championship. The VRSCX had the same dimensions as the 2007 VRSCAW, featuring the 240 mm rear tire, 5 gallon gas tank, and forward controls. However, the VRSCX also had paintwork similar to the pro stock V-Rod, a smoked drag-visor windshield, as well as the 1,250 cc Screamin' Eagle Revolution Engine. 1400 were built.
VRXSE: V-Rod "Destroyer"
In 2006 Harley-Davidson Introduced a non-street legal drag bike nicknamed "the Destroyer". It came with the same engines as others in its family, with the exception of a long stroke flywheel, larger valves, dyno tuned velocity stacks, large bore high compression forged pistons, high lift cams, multi stage lock-up clutch, programmable shift light, pneumatic shifter, larger throttle bodies, and more race equipment. A total of 646 vehicles were produced with 625 released to dealer showrooms.
The Revolution engine
The Revolution engine is based on the VR-1000 Superbike race program, developed by Harley-Davidson's Powertrain Engineering team. It is a liquid-cooled, dual-overhead-cam, internally counterbalanced 60 degree V-twin engine with a displacement of 69 cubic inches (1,130 cc), producing 115 horsepower (86 kW) at 8,250 rpm at the crank, with a redline of 9,000 rpm. It was introduced for the new V-Rod line in 2001 for the 2002 model year, starting with the single VRSCA (V-Twin Racing Street Custom) model.
A 1,250 cc Screamin' Eagle version of the Revolution engine was made available for 2005, and was present thereafter in a single production model from 2005 to 2007. In 2008, the 1,250 cc Revolution Engine became standard for the entire VRSC line. Harley-Davidson claims 123 horsepower (92 kW) at the crank for the 2008 VRSCAW model. The VRXSE Destroyer is equipped with a stroker (75 mm crank) Screamin’ Eagle 1,300 cc (79 cu in) Revolution Engine, producing over 165 horsepower (123 kW).
The photo 2002-Harley-Davidson-VRSC-2218-GP.jpg (2002 Harley-Davidson VRSC - The OL) was uploaded by: [email protected]